No Equipment is "No Maintenance"

When a salesman tells you that you never have to worry about maintenance on a piece of equipment, be very wary.

We are learning that every piece of equipment needs maintenance, some more than others.  Keeping maintenance logs for the various machines can be very helpful.  But a regular careful inspection is also a good idea.  I'm not sure how long one of the disks on our harrow had been freewheeling, but by the time we noticed it the disk had done some serious damage to the shaft. The hole in the middle of the disk, which should be a square and fitting tightly onto the shaft, was almost a perfect circle.  By twirling around the shaft instead of fitting onto it, the disk had worn a ring into the shaft that can't be repaired.

So we have added disk observation to our long list of inspections and shaft replacement to our long list of maintenance.

Camera Observations

Now that we have 3 cameras for observations we decided that we need to coordinate the data.  Having read that using a camera for every 100 acres can give a good picture of the wildlife, we have divided our property into 3 areas.  Within each area we have designated smaller parcels that have unique characteristics, such as a stream or large groups of oaks, so that we can more accurately pinpoint where the cameras are placed..

Our cameras have the ability to print out not only the time, date, and temperature at the time that a photo is taken but also the name of the camera.  For the name we can use a number and letter combination that helps to note exactly where the photo is taken.  The number 1-3 designates the general area in the property, and the letter A-Z then designates a particular parcel.  When we set up a camera we can just designate the name for that particular location.

For example, if a photo shows the name of the camera to be 2 M, that would mean that the location of the photo (and the camera) is in the 2nd large area of the property but also in the section of that large area denoted by the letter M.  Since the camera name can be printed on the photo it will give us a clearer picture of who is active where and when.

The Power of the Screw

Recently we attended a large garage sale at a high school.  The sale consisted of mostly furniture, clothing, and electronics.  However, under one of the tables we noticed an unusual piece of equipment.  It had a wooden handle and looked like it belonged on a farm, so we picked it up and examined it.  We finally realized that it was basically a large screw that, when placed vertically on the ground and turned with the wooden handle, would dig a hole.
This intrigued us, because we were planning to build a fence and needed to dig about 25 holes for the fence posts.  We have a post hole digger, but it is awkward and difficult to use in hard clay soil.  We had also contemplated buying an auger to use with our tractor, but that tool is quite expensive.  So we decided to take a chance on this antique, or at least very old, farmtool, helping the school and hoping to help us with the fence.

We were quite excited to find that our garage sale discovery did an excellent job of digging the holes that we needed, and, as an additional benefit, it was fairly easy to use.

Two Post Hole Diggers

Design of the Screw